YAMAHA CR-1020 NATURAL SOUND STEREO RECEIVER SERVICED & RECAPPED

Description

YAMAHA CR-1020 NATURAL SOUND STEREO RECEIVER.
THIS UNIT WAS BROUGHT TO STEREO REHAB 5800 N. WESTERN AVE IN CHICAGO FOR SERVICE. NEEDED A NEW VOLUME BALANCE POTENTIOMETER.
THE POT I SUPPLIED WAS IN STELLAR LIKE NEW CONDITION!
FIRST OFF I WOULD LIKE TO SAY STEREO REHAB ARE SOME OF THE BEST
TECHS I HAVE EVER SEEN, THESE GUYS KNOW THERE SHIT!!!
THEY WILL NOT JUST FIX YOUR PROBLEM WITH A UNIT THAT'S NOT THE WAY THEY WORK. THIS IS WHY THEY ARE CALLED STEREO REHAB.
THEY WILL METICULOUSLY GO THROUGH EVERYTHING ON THE UNIT AND REPLACE EVERY THING THAT NEEDS TO BE REPLACED AND BRING THE UNIT TO ALL NEW FACTORY SPECS AND SETTINGS, SEE PHOTO 8 AND READ WHAT HAS BEEN RECAPPED AND SET TO FACTORY SPEC.
(REPAIR COST FOR THIS UNIT WAS 6.67) COMES WITH A 1 YEAR WARRANTY FROM STEREO REHAB
FROM THE DATE INVOICE WAS PAID 5/5/2021 THE CASE WAS SANDED AND RE-STAINED WITH RED MAHOGANY WITH MULTIPLE COATS OF OSMO POLYX, THERE IS A BLEMISH ON THE LEFT SIDE OF CAB
JUST ADDS CHARACTER! BOTTOM WAS SANDED AND PAINTED A BLACK LACQUER, THE HEAT GRILL WAS WET SANDED AND RE-PAINTED WITH A SHARP LOOKING METALLIC SILVER HEAT PAINT, LOOKS BETTER THEN THE ORIGINAL! ALSO ADDED SOME ALUMINUM ISOLATION FEET. LOOKS MUCH BETTER
THEN MY PHOTOS! THEY DON'T DO IT ANY JUSTICE!
COMES WITH A PRINTED SERVICE OWNERS MANUAL.
MY PERSONAL OPINION IS THAT THE YAMAHA CR SERIES WERE ONE OF THE BEST AND CLEANEST
SOUNDING AND MORE SOLID MONSTER RECEIVERS MADE!
ANY QUESTIONS PLEASE FEEL FREE TO ASK
Specifications
Tuning range: FM, MW
Power output: 75 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 100kHz
Total harmonic distortion: 0.05%
Damping factor: 40
Input sensitivity: 2mV (MM), 120mV (line)
Signal to noise ratio: 81dB (MM), 100dB (line)
Output: 120mV (line)
Speaker load impedance: 4Ω to 16Ω
Semiconductors: 4 x IC, 3 x FET, 109 transistors, 58 x diodes, 7 x zener diodes
Dimensions: 540 x 167 x 415mm
Weight: 18.8kg
Year: 1977