UNUSED! Nordson-EFD Ultra TT 325 Automated Dispensing System 4 axis Robot GUAR!

Description

Nordson-EFD Ultra TT 325 Automated Dispensing System 4 axis Robot
This unit was purchased for R & D work on a project that was canceled before it ever started.
NEVER USED IN Production!
The Unit's Serial Number Tag Reads:
Model Number: 325 Ultra TT
Serial Number: EF30360
Power Requirements: 100-240 VAC~, 5 A, Single Phase, 50-60 Hz
Date Manufactured: 09/2005
CE Marked: Yes
PDA Software/Firmware Version: 1.0 (not currently installed on the PDA but the CD's are included for it)
PDA dock with USB computer connection cable.
PDA to Ultra TT connection cable
EFD Computer software CD and floppy disk for restoration and utility.
Ultra-TT Key Features:
Fully integrated positioning and dispensing functions.
Easy programming with the Palm handheld.
Height sensor for critical deposit control.
Description:
The Ultra TT Automation Series combines precision dispensing and accurate positioning functions into one fully integrated, compact tabletop unit.
For manufacturers, the easy programming of the Ultra TT Series - combined with closed-loop servo controls and powerful drive motors for fast, accurate positioning - means higher productivity, greater process consistency, and less scrap and rework.
Ultra 325TT Specifications:
Work Area: 325 (X) mm x 325 (Y) mm x 100 (Z) mm
Resolution: 10 µ
Repeatability: 25 µ
Max. Speed: 500 mm/sec
Acceleration: 0.25 g
Mechanical Configuration: H-Bridge De-coupled Axes
Control Method: Closed Loop DC Servo
Drive System: Cable Drive
Footprint: 560 mm W x 670 mm D x 750 mm H (does not include accessories and the dispensing system)
Weight: 54 kg 120 lbs
Tool Payload: 5 kg
Work Piece Payload: 10 kg
Programming Interface: Front Panel Buttons, Palm Handheld
Program Capacity: 100
Point Capacity: 10, 000
Theta Axis: Upgradeable from the factory
General Purpose I/O: 16 inputs / 16 outputs
Discrete I/O: 1 analog input / output, 4 inputs / 4 outputs, 2 solenoid drivers
External Communications: 1 RS232 / 1 Pal
Height Sensor: Yes (Standard)
Tip Change Reset: Yes (Standard)
Software Compatibility: Palm OS 4.0 or higher
Current Consumption: 320 Watts
Input Voltage: 100 VAC ~ 240 VAC (±10%)
Dispense Controller: Integrated
Number of Dispense Valves/Syringes: 1, 2 or 3
Patterns: Lines, Circles, Arcs, Continuous Paths, Potting and Dots
Dot / Line Types: 10 Dots / 10 Lines per program
Front Panel Control: Offset, Jogging & Program Select