Tramex MRH III Digital Moisture Meter for building materials MRH3

Description

Product Description
The Tramex MRH-3 Non Destructive Moisture and Humidity Meter for Construction Materials is a electronic impedance moisture meter for non-destructive measurements (Moisture testing of wood, drywall, masonry, roofing and other construction materials) The small pocket size make this hand held gauge ideal for use in different industries, e.g. flooring, indoor air quality, water restoration, pest control, inspection/surveying. The parallel co-planar electrodes on the base transmit a low-frequency signal into the material under test. For carrying out a test, simply hold the the MRH-3 to the surface. The MRH-3 can be used on wood, plaster / brick, tiles and plasterboard (drywall). The gauge has plug-in ports for optional probes.
Product Features
Deep signal penetration up to over 1" into the materials being tested without the need to damage the surface
Moisture testing of wood, drywall, masonry, roofing and other construction materials
Digital, non destructive meter
Specific Gravity adjustment for most wood species
Deep signal penetration up to over 1" into the materials being tested without the need to damage the surface
External Rubber electrodes make direct contact with the material being testedfor best sensitivity and repeatability
Wide range of readings for wood of 5% to 30% and 0 to 100 comparative for all other materials
"Hold Function" enables user to "freeze" the reading. Useful for taking readings when the meter face is not visible
Switchable "On" or "Off" audio warning tone
Automatic Power Shuttoff switches "Off" when not in use
Automatic Default to last user setting when switched back on
5 different measurement scales: wood, roofing, masonry, drywall, laminate
Product Specifications
Power supply
Battery operated (included)
Warranty
1 year
Kit Contents
MRH-3 Gauge, Manufacturer certificate, User manual, Protective pouch