Raspberry Pi 4 Pack, Rpi Pack Standard(Raspberry Pi , Usb Pack Raspberry Pi,)

Description

Raspberry Pi 4 Pack, Rpi Pack Standard(Raspberry Pi , Usb Pack Raspberry Pi,) New Expansion Board Power Supply With Switch For Raspberry 4B/ Raspberry 3B+, 3B,2B+
Item Condition:
New
Model:
4328613101
Product Information
Support Charge While Discharge: It Will Not Affect The Output Of Ups Power Supply When External Power Outage. Note: If You Use Ups To Supply Power For Raspberry Pi3B/3B+ When It Is Charging, Please Ensure That The Input Power Is Not Lower Than 2.5A. Recommended Use: 3V 2.5A Power Supply. Document Link: Https://Drive.Google/File/D/12_Ucy6U5Iaznpgsu-4Yfty0W-D2Rem_4/Viewusp=Sharing. Github: Https://Github/Rcdrones/Upspack_V2/Blob/Master/Readme_En.Md.. Assembly Video: Https://Drive.Google/Openid=1Poxlvqldkzgveznagr_W9C4Qkphtst9C; Two Power Modes: Outdoor Portable Model And Indoor Ups Power Supply Mode: 1) As An Outdoor Portable Power Supply, The Motherboard Is Powered By A Lithium . And He Maximum External Power Supply Capacity Is: 5.1V. 2.5A. 2)As An Indoor Ups Power Supply Mode: Microusb Plugs Into A Normal 5V 2A Power Adapter, And The External Output Interface(Usb-A Interface) Can Output A Maximum Of 5.1V.3A..4+2Led Are Designed To Show The Status Of Power, Charge Or Discharge: 1) 4 Power Leds: Used To Show The Current Voltage And Power. 2)Power Led: When The Switch Is Turned €Œonâ€, The Led Is Lighting, And When It Is €Œoffâ€, Led Is Off. (Used To Check Whether The Power Is Supplied Externally). 3) Charge Charging Indicator Led: When The Ups Is Externally Charged Via The Microusb Interface, The Charge Led Starts To Work..With Protect Function: The External Output Port Has A Self-Recovery Fuse To Prevent The Raspberry Pi From Burning Due To An External Short Circuit. 1) 5V.3A Self-Recovery Fuse: When The Two Usb Output Currents Total 3A, The Self-Recovery Fuse Will Be Blown. When The External Recovery Is No Load. The 5V Output Will Be Automatically Restored. 2) Pmu Over-Discharge Protection: When The Lithium Batter Voltage Is Lower Than 2.8V, Pmu Believes That The Has Been Over-Discharged, It Will Automat.Two Output Modes: Except For The Regular Output Via The Usb Port. At Strong Currents, Such As For High Loads Above 2.5A, The Drop In Voltage On The Usb Cable Is A Problem That Can Not Be Ignored. So We Provide A 2.54Mm Head As Gift, Which Is Soldered To The Raspberry Pi Gpio 5V Interface For Direct Power Supply, To Minimize The Damaged Cable And Pressure Drop. In The High-Power Applications, Cable Damaged Will Cause Lighting Bolts On The Rpi, You Can Weld The Head To The 2.54Mm Header Interface..