-40%

Pioneer Light Replacement Kit w/ White LEDs Model SX-636 Receiver Lamp Bulbs

$ 8.97

Availability: 24 in stock
  • Item must be returned within: 30 Days
  • All returns accepted: Returns Accepted
  • Brand: Pioneer
  • Return shipping will be paid by: Buyer
  • Condition: Open box
  • Restocking Fee: No
  • Refund will be given as: Money Back

    Description

    Up for sale here is this complete replacement lighting set for the Pioneer SX-636.  You will receive:
    Seven (7) snap-in warm white LED fuse lamps (for the tuning dial and meters)
    Five (5) wired 4mm warm white LEDs (for the source lights & FM stereo light)
    One (1) wired 8v 3mm orange LED (for the tuning needle)
    These are top-quality bulbs, and are the exact same ones I use when I rebuild Pioneer gear.  These are top-of-the-line lights--I love using them!  I have found that warm white LED fuse lamps look the best for the tuning dial--they give a nice clean blue glow.
    You will need a soldering iron, wire cutters, needlenose pliers, heat-shrink tubing (and something to heat it with), and a Philips screwdriver.  Be very careful not to damage the tuning dial cord when you're soldering!  If you wrap the dial cord in aluminum foil ahead of time, that will help protect it.  Replacing the tuning needle light is a bit difficult--you need to carefully pry open the little metal holder above the needle, put in the new bulb, then close up the metal holder again.  The replacement tuning needle LED wires are a bit shorter than the originals, so you may need to splice the wires, then cover them with either heat-shrink tubing or electrical tape.  I have kits for most other Pioneer gear listed, just take a look at my other listings.  Please see my pictures for details.
    US shipping and handling is , and international is , no matter what quantity you buy.  All my small parts are set up for combined shipping, so just use the "add to cart" feature and then check out all at once, and it will combine shipping. If you have any questions, please ask.
    Looking for more parts?  I have
    power switches
    ,
    feet
    ,
    pushbuttons
    ,
    top case screws
    ,
    bottom screws
    ,
    faceplate screws
    ,
    white LED fuse lamps
    ,
    blue LED fuse lamps
    ,
    6.3v bi-pin bulbs
    ,
    8v bi-pin bulbs
    ,
    12v bi-pin bulbs
    ,
    wired 8v 60ma bulbs
    ,
    new power cords
    ,
    new main capacitors for the Marantz 1060/2230
    ,
    wired Pioneer speaker plug replacements
    ,
    new 630v yellow film capacitors at 13 different values
    ,
    a large variety of transistors for vintage stereo repair,
    and more.  Just use "add to cart" on everything you want and then check out for combined shipping.