Pioneer CT-F1250 Cassette Deck Deluxe Restoration Kit - Wima, OnSemi, Nichicon

Description

This is a Deluxe Restoration kit for the
Pioneer CT-F1250 Cassette Deck
. This kit includes caps for ALL boards in the deck.
This kit restores and upgrades the CT-F1250.
Wima Film Caps
are used to replace all caps of 4.7uf or smaller. All other electrolytics are replaced with high quality Nichicon UKW or Panasonic FC caps.
163 total caps
get replaced. The kit also replaces
19 transistors
that are now known to be noisy.
The sonic improvement may induce goosebumps! Your 1250 deserves this.
Superior to other kit suppliers (Wima film caps sound better, transistors replacing known problematic one's) our kit will bring out the best in your deck!
Pictures show the Mother board and power supply board replacement parts, parts for all other boards are included as well. Parts are bagged by board
The kit replaces electrolytic and tant caps with high quality new ones sourced via
reputable USA distributors
like Digikey and Mouser. Most caps are
Nichicon
high quality UKL and UPW capacitors, we also sometimes use
Panasonic FC
caps for filtering in spots. All new caps will be the same capacitance as the originals with voltage ratings at least as high as the originals and oftentimes higher. Any capacitor of 4.7uf or lower is replaced with a high quality Wima film caps for better sound and reliability.
Transistors
are also sourced the same way and almost all are highly reliable on-semi devices. Not all (not even most) transistors get replaced, just those that time and collective knowledge have shown to be either noisy, unreliable or at the edge of their operating ability.
The individual doing the work should be competent with a soldering gun, multimeter, reading a schematic etc. I am not a tech, but I have successfully done hundreds of restorations over the last 20 years.
Many of the parts lists for these kits were compiled when we restored units, others are sourced from the service manuals (digital download included in purchase if you don't know how to source it). We have compiled parts lists for well over 200 units for units from Marantz, Technics, Pioneer, Sansui, Harman Kardon, etc. We do not sell kits for tube gear currently.
If the service manual is wrong (it does happen) we will ship you out the correct parts free of charge. The same is true if we make a mistake in compiling the kit ( I hope not but just in case). We want this process to go smoothly for you.
Included is a two page instruction/guidance sheet with some helpful hints. It is not a step by step guide. But, with it, the service manual, our part number labeled parts list you will have everything you need to get the job done.
The kit will ship (usually the next day) via USPS First Class with tracking.
We have bought in bulk hoping to provide the community with an easy, time and cost effective solution. Any feedback on how to do that better is appreciated.
Thank you