Fox Fork 32,34,36, 38, & 40 Grip/Grip2 Tool Kit. Tools needed for Rebuild /seals

Description

This is made in
U
S
A
by WCM!!!
This auction is for a 9
piece tool kit
for the fox
32/34/
36/38/40
with
Grip/Grip2 damper.
The kit includes a
CNC
machined shock clamp for the
2017-2022 FOX GRIP damper and 2019-2022 GRIP2 damper for fox 32/34/36/38 and 40 models
. . The clamp fits the
body
,
and the shaft of the GRIP damper assembly.
This has the same fit as fox part #
803-01-324
Its made of
6061
aluminum and is made for a
precision fit
. We left plenty of material so there is a lot of clearance when using the shaft clamp, and we made it .630 thick to fit into the tight spaces.
The sockets are
cnc machined
out of
6061 aluminum
and fit a
32mm, 28mm or a 26mm top cap
. They have
no chamfer
on the 6 sided hex which make it ideal for the very short air caps and top caps that forks have. It also has a
tighter clearance then an equivalent size socket to give you better holding power.
These fit a 2019(some older models as well)
FOX 36
Stanction fork top cap and air caps.
The
pocket is .5 inches deep
and has a big chamfer on the outside edge to help clear any fork and it has some big notches on the top so greasy fingers can still grip it fine. It has uses a
3/8
inch drive
.
These are not heavy duty sockets for auto or truck repair where stuff is tighted to 100+ ft/lbs, these are only made for fork repair
Then we have
3 seal bullet tool found on different grip models
. These are
CNC machined
out of
billet 6061aluiminum
.
These are used to slide the seal head over the shaft without cutting the seal. These fit the same as fox part numbers:
398-00-657. It fits NA2 shaft size.
398-00-371 Fits 10mm grip and others
398-00-320 Fits CTD FIT and other 8mm shafts
Last we have a
pair of
6061
CNC
machined fork
spring side
and
damper side
removal tools.  One is an
8mm
and the other is a
10mm.
These fit the same as fox part number
398-00-681
and
398-00-682
These will
fit
all 2005-2022 fox forks
including  32,34,36,38 and 40mm forks.  These will also work with step cast models.
Damper assembly or fork is
NOT
included
in auction, just the tools.