Android ADK USB Development Board 'Micropendous' AT90USB1287 AVR Demo Tool USA

Description

Product Details
Manufacturer
NooElec
Model
Micropendous
Quantity
1 Micropendous Board
Technical Details
Documentation & Schematics
Size
3.4" x 2.1" x 0.7"
Temperature Range
Industrial (
-40°C to 85°C)
MCU
AT90USB1287
Applications
AVR Programming/Development
Product Information
This is a
fully assembled
AVR USB device designed by
Opendous
and manufactured by NooElec.  A portion of the proceeds is donated to Open Hardware Initiatives; namely
Opendous
and
LUFA
In our opinion it is a much better development board than most on the market!  Why?
Features
Completely
Open Hardware
Design. Schematic/layout/BillOfMaterials/assembly instructions
available
for Open Source
KiCAD
RESET and HWB
buttons for bootloader activation
- no external programmer required!
USB or externally powered
through the DC Jack (2.1mm ID, 5.5V to 15V input)
microSD connector
in SPI Mode
5V rail capable of up to
1A
and 3.3V rail capable of
up to 500mA
Atmel
AT90USB1287
USB AVR Microcontroller
USB 2.0
Full Speed (12Mbit/s)
USB Device and Host mode
USB-B connector for power sourcing, device development, and firmware upload
USB-A connector for USB Hosting
120kb
of available
FLASH
memory for your programs (8kb used by USB bootloader - stock Atmel or
LUFA
)
On-chip
8192 bytes
of
SRAM
and
4096 bytes
of
EEPROM
up to 128kbytes of available
External SRAM
16MHz Crystal
25 available General Purpose IO (GPIO) Pins
I/O pins accessible through an
Opennect
compatible
Opennect-Controller_MCU_5V-PWR_5W
connector and/or
Arduino
compatible headers and/or
STK500
compatible 0.1"x0.1" 5x2 DIL Headers
PortB is bidirectionally voltage translated to 3.3V through a
TXB0108
IC
JTAG header
for debugging or bootloader update
RoHS-compliant
As always if you have any questions or concerns contact us anytime!